Our toolmakers are highly skilled at tooling repair, F4Forming TEC offers:

1. Adjust the shut height difference in the stamping process;

2. Replace the pressing and jacking springs;

3. Grinding or replacing punches or inserts that have been damaged or failed during production;

4. Check whether the skip detector and miss feed sensor of the mold work properly;

5. Inspect whether the press is working normally,check whether the punch safety block is damaged and replace the damaged punch safety block;

6. For the continuous die with pneumatic feeder, it is necessary to check whether the feeding step distance changes, if any, it must be adjusted;

7. Solve the die abnormality when the product is defective.